Self-supported hollow Co(OH)2/NiCo sulfide hybrid nanotube arrays as efficient electrocatalysts for overall water splitting

Journal of Solid State Electrochemistry - Developing low-cost and earth-abundant electrocatalysts with high activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER)...     

水溶性CdZnTe量子点荧光猝灭法测定银离子的研究

以疏基丙酸(MPA)为修饰剂,制备了水溶性CdZnTe量子点,研究了pH值,回流时间对CdZnTe量子点荧光强度的影响.基于Ag离子对CdZnTe量子点的淬灭作用,建立了一种新的测定Ag离子的方法.在最优试验条件下,Ag离子浓度在2×10-7～2×10-6 mol/L时与CdZnTe量子点荧光强度呈线性关系,线性回归方程为△F ＝-7 ×10-5c+5×10-5,相关系数R＝0.9787.该量子点荧光分析方法简便快速、灵敏度高、选择性好.     

Non-isothermal thermogravimetric analysis of pyrolysis kinetics of four oil shales using Sestak–Berggren method

Journal of Thermal Analysis and Calorimetry - In this study, the non-isothermal pyrolysis method was used to investigate the pyrolysis characteristics of oil shale from four areas: namely Nongan,...     

基于加权流量介数中心性的路网脆弱性分析——以无锡市为例

针对当前路网脆弱性研究中缺乏对真实交通状况考量的问题，在复杂网络理论的基础上，结合交通流量信息，提出了基于加权流量介数中心性的路网脆弱性分析方法。首先计算路网拓扑抽象图中各节点的最短路径介数中心性，然后使用流量数据对相应区域最短路径介数中心性加权，综合得到最终的脆弱性指标结果。以无锡市为例，对其实际交通路网脆弱性进行了计算，结果表明，该方法能综合反映静态全局路网结构与动态局部通行信息和现实交通情景下的路网脆弱性。     

In-chain functionalization through the combination of ring opening copolymerization and oxime “Click” reaction towards X-ray opaque polylactide copolymers

X-ray imaging functionalization of biodegradable polyesters is a great demand and challenge in biomedical applications.In this work,a strategy of in-chain functionalization through the combination of ring opening copolymerization and oxime "Click" postfunctionalization was developed towards X-ray opaque polylactide copolymers.A functionalized cyclic carbonate was first synthesized and used as comonomer of polylactide copolymers,which were subjected to postfunctionalization of oxime "Click" reaction towards iodinated polylactide copolymers.The chemical structure and physical properties of the target products were traced and confirmed.In vitro cytotoxicity evaluation with 3T3-Swiss albino by Alamar blue demonstrated a low cytotoxicity.The X-ray radiopacity was analyzed by Micro-CT and quantified by Hounsfield Units value,which could be tailorable by the feedstock.It is a promising X-ray visible implantable biomaterial in biomedical applications.     

有机三溴化铵的选择性溴化反应研究进展

有机三溴化铵（OATBs）作为溴素的固体形式，具有优良的反应活性和热稳定性，是一类重要的溴化试剂，在有机合成中应用广泛。本文从反应类型、OATBs种类和作用机理等方面，对OATBs参与的溴化反应的研究进展进行了全面分析。通过与溴素对比，指出了该类化合物在芳基的选择性溴化、双键的立体选择性加成和羰基的α-溴代等方面的研究价值。针对研究现状，提出绿色、高效的反应体系是其未来的发展方向。     

开关型Pickering乳液体系

Pickering乳液以胶体尺寸的固体粒子代替传统表面活性剂作为稳定剂,具有超稳定,生物相容性好以及对环境友好等优点。开关型Pickering乳液可随pH值、CO₂/N₂浓度、温度、磁场强度及光强度等条件的变化而改变固体乳化剂的表面润湿性,实现在“乳化”与“破乳”之间的快速转换,在非均相催化、乳液聚合等诸多领域有广泛的应用前景。本文全面总结了近年来开关型Pickering乳液的研究进展及其在界面催化系统、液膜处理有机废水、药物的包封与释放等方面的应用。     

An Averaging Principle for the Time-Dependent Abstract Stochastic Evolution Equations with Infinite Delay and Wiener Process

Journal of Statistical Physics - In this paper, averaging principle for the time-dependent stochastic evolution equations (TDSEEs) with infinite delay is investigated. In proper non-Lipschitz...     

Catalytic properties of mesoporous materials supported heteropoly acids for Baeyer-Villiger oxidation of cyclic ketones

Three mesoporous molecular sieves loaded silicotungstic acids, named HSiW/SBA-15, HSiW/MCM-41, HSiW/MCM-48, were prepared and characterised by XRD, FT-IR, TEM and SEM. The catalytic performance of the prepared materials for the Baeyer-Villiger oxidation of cyclic ketones was carried out in the presence of 30%H₂O₂ under mild conditions. These loading materials were proved to be efficient and reusable catalysts, they all exhibited excellent catalytic performance for the Baeyer-Villiger oxidation of cyclic ketones with 30% H₂O₂ as oxidant. Many cyclic ketones were efficiently converted to the corresponding lactones with up to 90% conversions and high selectivities under the optimum reaction conditions.

Cyclic ketones were efficiently oxidised by mesoporous materials sopported silicotungstic acid to the corresponding lactones with 30%H₂O₂ as oxidant. All of the catalysts showed promising recyclability in the reactions.     

Microstructure evolution and passivation quality of hydrogenated amorphous silicon oxide(a-SiOx:H) on〈100〉- and 〈111〉-orientated c-Si wafers

Hydrogenated amorphous silicon oxide(a-SiOx:H) is an attractive passivation material to suppress epitaxial growth and reduce the parasitic absorption loss in silicon heterojunction(SHJ) solar cells. In this paper, a-SiOx:H layers on different orientated c-Si substrates are fabricated. An optimal effective lifetime(τ(eff)) of 4743 μs and corresponding implied opencircuit voltage(iV(oc)) of 724 mV are obtained on〈100〉-orientated c-Si wafers. While τ(eff) of 2429 μs and iV_oc of 699 mV are achieved on 111-orientated substrate. The FTIR and XPS results indicate that the a-SiOx:H network consists of SiOx(Si-rich), Si–OH, Si–O–SiHx, SiO2 ≡ Si–Si, and O3 ≡ Si–Si. A passivation evolution mechanism is proposed to explain the different passivation results on different c-Si wafers. By modulating the a-SiOx:H layer, the planar silicon heterojunction solar cell can achieve an efficiency of 18.15%.